Let’s say you have purchased a new home and you discover an old swimming pool which is completely in despair. If you find yourself in this situation, you are not alone. It is quite common for existing homes to come with pre-built pools. Whereas some homeowners take better care of their pools others leave future owners with pools filled with debris and dirt.
So what are you supposed to do with an old unused pool? Well, that depends on several factors, some of which might be beyond your control until you take ownership of your new home.
Usually, it is entirely possible to renovate an old pool and transform it into a beautiful Oasis. However, at times it would make more sense to simply, remove the old pool, and install a new one.
Advice from swimming pool builders in Brisbane
Deciding on renovating your pool will depend upon its initial condition. Sometimes you are lucky and there’s nothing wrong with the pool, it’s just a little dirty and unkempt. Take a look whether the surface of the pool is in good condition and does the pump and the filter system work well? If that is the case you have bought a perfectly usable pool and you can simply get away with a bit of deep cleaning. You can speak with swimming pool builders in Brisbane to help restore your pool to its former beauty.
In several cases, it is easy to recover a pool that has been unused for a couple of months. Hire a reputable pool maintenance company to ensure all the pipes, fittings, and components of your pool are cleaned out properly.
Concrete pools will need to be cleaned with an acid wash and it is a task that is best left to the experts.
What happens when your pool has parts that don’t work?
If the pumps, filters, heaters, and chlorinators have broken down, You should call a reliable swimming pool builder in Brisbane. If the interior looks salvageable but you are not certain whether you will be able to use the machinery, it is recommended to get a consultation with a pool maintenance company. They will be able to test the systems and find any faults in the equipment and provide you with cost effective solutions.
Keep in mind that it is not going to be cheap. Swimming pool machinery can cost several $1000 and if the plumbing system is damaged you would have to decide whether you need to renovate the pool or replace it completely. If the pool is going to be replaced you’ll have to speak with a reputable pool builder. It is common that your old pool might have working parts but only a worn-down interior surface.
In any case, the pool installer will check the surface durability and let you know what they can do to salvage the pool for you. Sometimes a pool is too far gone to be restored or get back in shape. The longer the pool has sat unused and unmaintained, the more difficult would it be to get it back in working condition.
Whatever choice you make regarding your old pool, always hire Brisbane’s trusted pool installers to get proper advice.
Leave a Comment